By JM Machinery
Rebuilt Calenders Our calender re-manufacturing facilities are unsurpassed in North America. We have in-house roll grinding capabilities of 120" roll face, and the expertise gained by years of re-manufacturing and upgrading calenders for the tire industry. We can offer retrofits to include new... Read more »
CSI can supply you with material between 0.015” to 1” thick. We can also calender material at widths over 80” wide. We calender most major rubber compound types, grades, and colors as well as more sensitive materials such as swellable compounds and zero-contamination products. Natural -... Read more »
We can supply you with material between 0.015” to 1” thick. We can also calender material at widths over 80” wide. CSI calenders most major textile categories including tire cord, aramid, polyester, cotton, nylon and other commercial fabrics. You are welcome to supply your own raw material,... Read more »
Want to supply your own raw materials for us to calender? No problem. Our industry experience and calendering capabilities are vast. Once your materials are on-hand, we’ll get your order scheduled and typically have it shipped out within five business days. DIMENSION CAPABILITIES - Our team can... Read more »
By Fort Wayne Mold & Engineering, Inc.
In compression molding, the rubber prep is loaded into the mold cavity, then the cavity is compressed in a compression press to fully cure the rubber material. The part is then removed by the operator. Flash control is tear-trims and overflows. Tear-trims and overflows can be removed by the...
Read more »
By Fort Wayne Mold & Engineering, Inc.
With Injection molding, the rubber prep is injected into the cavity forming components by a runner system. The press for this process is an injection press. The runner system can be hot, cold or valve gated. Flash control is tear-trim or trimless/flashless (ground lands) depending on the...
Read more »
By Fort Wayne Mold & Engineering, Inc.
In Liquid Silicone Rubber molding, the rubber prep is injected into the cavity forming components. A runner system is used to get the rubber material into the cavity. The press for this process will be an injection press. The runner system can be hot, cold, valve gated or open nozzle cold runner...
Read more »
By Fort Wayne Mold & Engineering, Inc.
In transfer molding, the rubber prep is pushed into the mold cavity by using a pot. The pot can be hot, cold (low waste), integral or bottomless. The press that can be used is a compression press or an injection press. Flash control is trimless/flashless (ground lands) or tear-trim. With this...
Read more »
By LyondellBasell Industries N.V
The proprietary Catalloy technology from LyondellBasell creates reactor thermoplastic polyolefins that combine the advantages of polyolefins with those of elastomers. The wide range of properties makes these materials unique. Catalloy processed resins can be used across a variety of markets... Read more »
By Precision Controls Systems, Inc. & Research Inc.
The ChamberIR 4069 infrared heater is designed to provide heat for products in continuous processes or test specimens. The Model 4069 heater focuses high-density infrared energy generated by T3 halogen lamps inward toward a cylindrically shaped target area. The clamshell heater design allows for... Read more »
By Precision Controls Systems, Inc. & Research Inc.
The ChamberIR E4 elliptical chamber heater is designed for rapid heating of small size continuous materials such as tubing, cable, and wire with an outer diameter less than 0.25 inch (6 mm). It may also be used as a high temperature furnace in test applications. The ChamberIR E4 is available in... Read more »
By Haas Saw
Premium HSS circular knife blades for cutting rubber hoses, belts, extrusions, profiles and sealing systems. Read more »
Precision Associates’ clean room manufacturing area is, in effect, a miniature replication of our regular manufacturing facility. Nearly all of the equipment used in our regular manufacturing processes is also included in our 6,000 sq. ft. ISO14644-1, class 7 (10,000) clean room. The compounds... Read more »
By Trelleborg Engineered Coated Fabrics
The Right Substrate Coating Makes All The Difference
Rubber, urethane and other polymers are used to provide optimized coating properties for a substrate. Rubber-coated textiles offer a variety of unique physical properties to meet demanding performance requirements. Urethane or polyurethane...
Read more »
By Allied Metrics Seals & Fasteners, Inc
Rod wipers are designed to remove dust, dirt, ice, weld flash and many other particulates from surface of the rod. They prevent damage to bearings, seals, packings, and rods, and can reduce or even eliminate contamination of fluids in hydraulic systems. This can provide a greater life for your...
Read more »
By Reliable Rubber & Plastic Machinery Company
RELIABLE'S experience and capabilities in the engineering and manufacturing of Two Roll laboratory mills is unparalleled. Our forte is providing cost-effective solutions to match your exact machinery needs & process requirements. Our capabilities in mills are the broadest in the industry, from...
Read more »
By Precision Controls Systems, Inc. & Research Inc.
The ControlIR products range from discrete power controllers to complete control solutions for the IR heating system. The ControlIR systems are sized and scaled for the correct voltage, amperage and required power controller. Where required the air cooling and water cooling functionality is... Read more »
By California Industrial Rubber
Most industrial settings rely on conveyor belts for essential tasks and functions. If a conveyor belt breaks, it can slow down production and constitute a major interruption to production. California Industrial Rubber Company offers premium quality belting and fabrication. When you purchase from...
Read more »
By Minnesota Rubber & Plastics - Now part of Trelleborg
If you’re looking for a proven design to injection molding manufacturing resource for your custom LSR projects, we have you covered. LSR is among a large portfolio of elastomers our customers spec for projects requiring unique properties. For example, in medical device applications LSR is a... Read more »
By Minnesota Rubber & Plastics - Now part of Trelleborg
Our expertise in thermoplastics resides from our extensive tool design knowledge combined with our process expertise utilizing the latest in cavity pressure control technologies. Engineers in industries as diverse as food and beverage to medical trust Minnesota Rubber & Plastics for our... Read more »
Precision Associates, Inc. (PAI) offers engineering services from initial part design to final delivery of custom molded rubber parts. If you need a standard O-ring, lip seal, gasket rubber-to-metal or other custom seal shape, we’ll manufacture the product you need to your exact... Read more »
By Acme Machell
Acme Machell is able to provide custom molded rubber products for any need because of our technology advantage.
Acme Machell is ISO 9001:2015 Certified and has the capability to develop and test rubber materials for any industries and uses. Our design and application engineering capabilities,...
Read more »
By LyondellBasell Industries N.V
Color plays a pivotal role in our lives. It has an important impact on our perception, influences us emotionally, and differentiates and creates uniqueness. As a powerful form of communication, color is therefore invaluable. LyondellBasell makes its customers’ vision a reality by giving objects... Read more »
By Acme Machell
Acme Machell is experienced in working with our customers to provide any product to meet their needs.
We have a wide range of products and an expert engineering staff that can assist you with the design of custom parts that will fit any need. Acme Machell is ISO 9001:2015 Certified. We will...
Read more »
By LyondellBasell Industries N.V
With our ISO 9001 registered facilities strategically located across the world, LyondellBasell is advancing what’s possible in custom powder processing. With a variety of toll processing services like size reduction, blending, and classification coupled with our technical expertise in powder... Read more »
By Minnesota Rubber & Plastics - Now part of Trelleborg
We Develop and Manufacture Custom-Molded Rubber Compounds and Components for Demanding Applications When clients are facing tough molded rubber engineering challenges, they turn to us early in a project for our material science, design, and manufacturing expertise. The result: quick answers,... Read more »
